XR2206 Function Signal Generator DIY Kit Sine Output 1HZ-1MHZ + Acrylic Case E9

🛠 DIY Signal Generator Kit (Requires Soldering)
✅ Key Feature
This version requires assembly, including soldering. Build your own signal generator for a hands-on learning experience.
🌟 Specifications
🔌 Voltage Supply: 9-12V DC Input
📶 Waveforms: Square, Sine & Triangle
🔗 Impedance: 600Ω ± 10%
⏱ Frequency Range: 1Hz - 1MHz
🎵 Sine Wave
📏 Amplitude: 0 - 3V (at 9V DC input)
🌀 Distortion: <1% (at 1kHz)
📐 Flatness: ±0.05dB (1Hz - 100kHz)
◼️ Square Wave
📏 Amplitude: 8V (no load, at 9V DC input)
⚡ Rise Time: <50ns (at 1kHz)
⬇️ Fall Time: <30ns (at 1kHz)
🔄 Symmetry: <5% (at 1kHz)
🔺 Triangle Wave
📏 Amplitude: 0 - 3V (at 9V DC input)
🌀 Linearity: <1% (up to 100kHz)
🔧 Debugging Instructions
Carefully insert the XR2206 IC, ensuring proper orientation.
Check all solder joints for errors or misalignment.
Connect a 9-12V DC power supply with a 5.5 x 2.1mm port:
Pin Center: Positive (+)
Barrel: Negative (-)
Note: Voltage above 12V may cause unstable output waveforms.
🎛 How to Use
J1 Jumper: Outputs sine wave on SIN/TRI blue terminals.
J2 Jumper: Outputs triangle wave on SIN/TRI blue terminals.
SQU Terminals: Outputs pulse waveform.
AMP Knob: Adjust amplitude of sine/triangle waves.
FINE Knob: Fine-tune frequency.
Coarse Knob: Adjust frequency coarsely.
📦 Package Includes
1 x Signal Generator (DIY Kit, 1Hz-1MHz with Case)